Roller Type

RL760
Application
  • Mainly used for same size cylindrical shaft of both ends as a basis of measurement; such as shaft or tube… etc.
  • Check the workpiece deflection, roundness, concentricity, bending curvature, axial parallelism…etc. precision error of inspected measurement.
  • Applies to the processing site, tool rooms, laboratories, machine tools shop.
  • Range of workpiece: Center High 90H: Ø5 ~ 100mm ； Center High 130H, 200H, 350H: Ø5 ~250mm
Features
  • High graded cast iron, base surface hardness HRC30 ± 2 °, lasting wear.
  • Tailstock is located by special locking design, do not cause to axial offset when moving the location. Tailstock can be locked by special type lever handle in any position, high accuracy.
  • Double roller of tailstock adapts high precision pillar roller bearing, to reduce mutual abrasion between the workpiece and roller.
  • Z-axis dial indicator holder: Vertical pole diameter: Ø12 mm, adjust pole diameter: Ø10 mm. Gauge holder is available for dovetail type and stemψ8mm flat type
  • Equipped with T- grooves, high scalability, more convenient to use.

Specification

***Dial gauge is not included.
***Beyond these specifications can be special ordered, Center distance maximum 4000 mm.

Double Flank Gear Rolling Tester

MT671DF
EMT671DF
EMT676DF

Specification

※ Probes : 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm

** Dial gauge is not included.
** Beyond these specifications can be special ordered.

Standard Type

MT526

Specification

** Slide type Center distance Maximum 1000mm
** Dial gauge is optional
** Beyond these specifications can be special ordered, the center distance maximum 3000mm.
** Center height 90—height adjustable 15mm Center height 130—height adjustable 30mm.
** Use Z1 &Z2 axial its center height at least 130mm.
** Use linear scale its cemter height at least 130mm.

Flat Tailstock Type

FRL784
FRL785Y
FRL787
FRL1S784YS
FRL2S785Z1S
FRL2S785Z2S
Features

Y axial slide travel: 124mm — General precision— standard equipment.
Y axial slide parallelism: General precision 0.02↓—standard equipment / High precision 0.005mm↓—customer optional.

Specification

** Slide type Center distance Maximum 1000mm
** Dial gauge is optional
** Beyond these specifications can be special ordered, the center distance maximum 3000mm.
** Center height 90—height adjustable 15mm Center height 130—height adjustable 30mm.
** Use Z1 &Z2 axial its center height at least 130mm.
** Use linear scale its center height at least 130mm.

Drive Wheel Type

WRL848Y
WRL1S848YS
WRL2S848Z2SL
WHRL880
WHRL1S880YS
WHRL2S880Z2SL
Features

Mono-slide moving accuracy:
Accuracy (A): 300mm / 0.02mm, only for easy mobility measurement.
Accuracy (B): 300mm / 0.01mm↓—customer optional.
Dual-slide moving accuracy : Flatness and travel accuracy : 1000mm / 0.01mm.

Specification

** Slide & hand wheel type Center distance Maximum 1000mm.
** Dial gauge is not included.
** Center height 90—height adjustable 15mm. Center height 130—height adjustable 30mm.
** Use Z2 axial its center height at least 130mm.
** Attached top press roller and parts stopper.
** Use linear scale its center height at least 130mm.