ULM JOINT DMS 680
|DMS 680||0.18 + L/1200 µm||0.000010 “|
|DMS 680 S||0.14 + L/1200 µm||0.000008 “|
|DMS 680 HA||0.10 + L/2000 µm||0.000006 “|
Range Of Applications (diameters from – to)
|External plain||0 – 680 mm||0 – 27 “|
|Internal plain||0 – 480 mm||0.04 – 19 “|
|External thread||0 – 480 mm||0 – 19 “|
|Internal thread||3 – 400 mm||0.12 – 16 “|
|Absolute||100 mm||4 “|
|Differential||680 mm||27 “|
Plain Plug gage Measurement
The movements of the work table allows high speed location of the inversion point.
Thread Plug gage Measurement
Three wire method. Calibrated wires are part of the standard equipment included with the machine.
Workshop Gage Block Inspection
The inspection is carried out by comparison with master gage block.
Thread Ring gage Measurement
The standard device includes 12 pairs of spheres for internal thread measurement. Range: 14-90 mm | 0.5″-3.5″
Small Ring measurement device
The measurement is carried out with zero contact force.
Minimum diameter: 1mm | 0.04″.
Snap gage measurement
Snap gages are placed on a special holder.
External Micrometer inspection
Micrometer head verification.
Dial Indicator inspection
Inspection of digital comparator, dial indicator and lever type probe.
Pitch measurement device
Internal and External thread pitch verification.
T-sphere (small thread ring) device
The device allows to measure thread ring down to 3 mm | 0.12″. Working field: 3-90 mm | 0.12″-3.5″. Note: smaller spheres available on request
Standard included. The temperature compensation device allows:
- direct compensation of the environmental temperature
- high thermal stability
- high accuracy in critical temperature conditions up to 28°C | 82°F
- direct reading of the temperature on the PC screen
Small Plain Ring electronic device
An electronic lever probe device with spherical-end stylus, allows fast measurement of small plain ring gages. Note: the standard machine includes a manual system (small ring device) to measure small plain ring gage.
Big Thread Ring device
To extend measurement range of thread ring gages up to 400 mm | 16″
Spline gage device
Gage with involute profile inspection.
MicroNet – Gage Management
Software standard included with the machine. MicroNet software allows to store gages into the database, automatic tolerance calculation, etc..
MicroNet – Gage Measurement
Software standard included with the machine. MicroNet software provides real time reading, thread formulae, automatic certificate printout, etc..