Search
Close this search box.

Electronic Chamfer Gauge

Electronic Chamfer Gauge

With digital readout and SPC’s ability to instantly measure the top diameter of a tapered hole.

BARCOR Electronic Chamfer Gage is a precision measuring instrument specifically designed to measure the top diameter of chamfers. Counter sink center drill bit or taper holes, simply push the Electronic Chamfer Gage’s spring-loaded Gaging Plunger into the workpiece being measured and read the dimensions directly to .0002″ or .005 mm with the SAME gauge or simply press a button. Switch to comparison mode from a known standard.

Like BARCOR’s well-known machines, the Electronic Chamfer Gage does not require a Setting Master (standard) or a lookup chart. To “zero” or “set” the gage, simply press the base against any flat surface and press the button. “On” with a long-lasting battery The gauge may be continuously powered through a 110 VAC battery adapter/charger or directly from a printer, PC, data collector, etc.

Over 320 standard BARCOR Electronic Chamfer Gage models are available in two angle ranges of 0-90° and 90-127° for both internal and external chamfering. The standard electronic Chamfer Gage comes with a Gaging Plunger made of hardened tool steel. There’s also an optional carbide piston with a lifetime wear guarantee.

Similar to BARCOR’s popular Mechanical Chamfer Gage, BARCOR’S Electronic Chamfer Gage is self-contained and fully portable. With no coupling unit, attachments, cables or external power required, the Electronic Chamfer Gage has a special indicator designed specifically for chamfer measurement. Based on the shape of the Gaging Plunger, the indicator’s special 360-degree rotating bezel allows the user to read any position. There is also a feature “Inch/Metric” and “Hold” controls and a large, high-contrast, easy-to-read LCD digital display for error-free readings.

Full SPC capabilities make the BARCOR Electronic Chamfer Gage compatible with virtually every brand of data collector. Either directly or through BARCOR’s optional Gage Port for use with data loggers, interfaces, processors, etc. Please contact the factory for details.

feature:

  • CHAMFERS/COUNTERSINKS
  • QUALITY CONTROL/GAGE ROOM
  • MODEL SHOP & PROTOTYPE
  • SCREW MACHINE PARTS
  • AIRCRAFT COMPONENTS
  • PRODUCTION MACHINING
  • HYDRAULIC FITTINGS
  • AUTOMOTIVE ASSEMBLY
  • RECEIVING INSPECTION
  • VALVE SEATS
  • SHAFT CENTERS
  • INSTRUMENTS
  • RIVET SEATS
  • TUBE FLARES
  • PISTON RINGS
  • STAMPINGS
  • CASTINGS
  • BUSHINGS
  • Similar in size, weight and appearance to BARCOR’s popular self-contained and portable mechanical Chamfer Gage.
  • Accuracy guaranteed: ±.0005″ for 90° model; ±.0009” for 127° model. Repeatability: within ±1 least significant digit.
  • Two modes: Direct reading as called in some printing. and comparing plus/minus from “zero” created with Master or verified parts.
  • Real Instant Inch/Metric switching ability to measure the same reading in inches or mm with the press of a button.
  • No need to set up a master (standard) or search tree. NIST (NBS) traceable.
  • Long battery life.
  • It can also be continuously powered via an A/C adapter or directly from a printer, PC, data collector, etc.
  • AGD Group 2 indicators feature a large, easy-to-read LCD digital display with three dimensional “hold” modes and a full 360-degree rotatable bezel. for convenient and error-free viewing.
  • Full SPC Capability: Direct compatibility with virtually all brands of equipment via Gage Port Open Collector RS-232 C Serial Type signal output, BCD Parallel or Mitutoyo,
  • Available for all BARCOR 320 models, including carbide and taper male external OD types.
Contact Us
Other Products
Scroll to Top
Verified by MonsterInsights